2 inch Tiedowns

Manufactured from a 2 inch wide heavy duty polyester material with a minimum breaking strength of 10,000 pounds. The webbing is marked with the working load limit, and each sewn end has a working load limit tag attached. All material, fittings and assembly complies with CVSA, DOT, CHP and WSTDA standards.

Working Load Limit 3,335 Pounds (1,513 kgs)

In house assembly available for longer or shorter lengths, or specilaity fittings requirements

Only trained, knowledgeable personnel should use tie down straps.

All tie downs should be inspected prior to use, straps that are cut, worn or damaged shall not be used and shall be replaced immediately.

It is the operator's responsibility to use appropriate type and number of straps for the load being secured. An edge protector shall be used where a tie down would be subject to abrasion or cutting at the point where it touches an article of cargo.

The use of “Cheater bars” or other means of increasing leverage on a ratchet buckle handle or winch can cause serious injury to the user and/or bystander.

Web tie down straps are rated for use in a temperature range from +90°C (+194°F) to -40°C (-40°F). Straps should be stored out of direct sun and away from damaging chemicals when not in use. Ensure load is stable before tightening or releasing tension in a strap assembly.